Formulators & Manufacturers of
Polyurethane and Epoxy Resin Systems
T: +44 (0)1443 222204
F: +44 (0)872 1154359
E: enquiries@creativeresinsystems.com
Product | Description | Colour | Comments |
---|---|---|---|
Heat Cure | |||
Unicure™ V003 | 1-Part PVC Plastisol | Natural | Thixotropic. Cures @ >110°C to semi-clear 50 Shore A elastomer. Phthalate-free. |
Unicure™ P007 | 1-part Heat-Cure Polyurethane | Beige | Thixotropic. Cures above 120°C to form tough, strong 80 Shore A elastomer. |
Unicure™ X028 | Single-part Heat-cure Epoy Adhesive | Off-white | Thixotropic. Cures above 140°C to give toughened rigid bond |
Primers | |||
AD002 | 1-part primer for olefinic substrates | Clear | Useful primer for polyolefins and some other plastics. |
AD003 | 1-part chlorinating primer | Clear | Effective primer for wide variety of polymeric surfaces. |
AD011 | 1-part primer for metals | Black | Useful GP primer for metals. |
AD016 | 2-Part Etch Primer for metals | Red/Brown | Chromate-free. Expensive, but very good on many metal substrates. |
Cleaners | |||
CL002 | Cleaner for cured isocyanate (liquid) | Straw | Highly effective cleaner for deposits of cured isocyanate - mobile liquid. |
CL003 | Cleaner for cured isocyanate (gel) | Straw | Highly effective cleaner for deposits of cured isocyanate - thixotropic gel. |
CL004 | Cleaner for cured silicone (liquid) | Brown | Cleaner for removing deposits of cured silicone - mobile liquid. |
CL005 | Cleaner for cured silicone (gel) | Green | Cleaner for removing deposits of cured silicone - thixotropic gel. |
Release Agents | |||
RA001 | Wax release agent for all types of resin casting | Milky white | Excellent versatile release agent for application by brush, spray or wipe. For moulding temperatures below 45°C. Aerosol version available. |
RA002 | Wax release agent for all types of resin casting | Milky white | Higher-solids version of RA001. |
WAX-1 | Aerosol version of RA001 | Milky white | Excellent versatile aerosol release agent. For moulding temperatures below 45°C. Bulk version available. |
Other Products | |||
OT008 | 1-part moisture-cure aliphatic polyurethane | Clear | Seals almost any type of porous surface prior to moulding. Cures to tough, clear film. |
OT009 | Soft-melting thermoplastic resin | White | Extremely tough, impact resistant polymer that can be softened and melted using hot water and moulded by hand. Cools to produce a tough rigid plastic. |
OT010 | Wax modelling and impression compound | Off White | Wax-based modelling compound. Can be re-melted and re-used many times. Fairly hard - other grades available. |
OT022 | Solid decontaminant for isocyanate | Brown | Absorbant, quickly neutralises isocyanate spillage hazard |
OT024 | Liquid decontaminant for isocyanate | Green | Rapid decontaminant for drum residues and spillage clean-up |
© 2012-2022 Dr Graham Hunt - ObscureMyEmail